BACK TO TWISTED PAIR INTRODUCTION VTT1000 ADAPTER VTT2000 ADAPTER VTT3000 ADAPTER VTT5000 ADAPTER VTT7000 ADAPTER VTT747 ADAPTER Specifications
	VTT747 Adapter Save your labor!!! Simply find a)spare pair of telephone wire (Category 2, 3, 4, 5) near the camera or source video and cross-connect through the building(s) to where you plan to put your monitor and/or destination device. Every wire run will need just two adapters, one on each end of the twisted pair. Outstanding noise immunity allows the use of existing wire. You'll NEVER have to run coax long distances again; the VTT747 can achieve much further distances than coax cable. You'll be able to obtain distances up to 800 feet when sending baseband full color or black and white, full motion video (30 fps). The VTT7474 adapter will allow you to change the way you design video applications. Architect and Engineer Specifications Video Attenuation: 1.5 dB max Coax Impedance: 75 ohms Common Mode Rejection Ratio: 36 db minimum Twisted Pair Impedance: 100 ohms Operating Frequency: 50 Hz to 10 MHz Maximum RF Input: 1.1 V @ 60 Hz Power: No power required. Temperature: -40 to +85 degrees C Humidity: 0 to 95%, non-condensing Enclosure Material: ABS plastic Dimensions: 1.75 x 1.0 x .75 inches Mounting Method: Adhesive Velcro® strip Warranty: LIFETIME Specifications subject to change without notice. To enquire about this product, please complete our enquiry form.
	To visit VTTI's home on the Web, click here. BACK TO TOP VTT1000 | VTT2000 | VTT3000 | VTT5000 | VTT7000 |VTT747 | TWISTED PAIR INTRODUCTION Coax Splitters | Fibre Optics Contact Us | Company Profile | Access Control Systems | Enquiry Form
	This site was designed and produced by Internet PageMakers