BACK TO TWISTED PAIR INTRODUCTION
|
VTT7000
ADAPTER |
VTT7000 Adapter
Simply find two (2) spare pair of telephone wire (Category 2, 3, 4, 5) near the camera/microphone or source video and cross-connect through the building(s) to where you plan to put your monitor and/or destination device. Every wire run will need just one Twisted Pair Transmission System consisting of a Transmitter and a Receiver. Outstanding noise immunity allows the use of existing wire.
You'll NEVER have to run coax long distances again; the VTT7000 can achieve much further distances than coax cable. You'll be able to obtain 3500 foot distances when sending baseband full color or black and white, full motion video (30 fps). Distances of up to five (5) miles can be achieved with the use of VTT7000R Twisted Pair Repeater every 3500 feet. and up to 3000 feet when sending black and white video. The VTT7000 Twisted air System will allow you to change the way you design video applications.
Architect and Engineer Specifications
Resolution Capacbility: 800 lines of resolution
Coax Impedance: 75 ohms
Twisted Pair Impedance: 100 - 150 ohms
Signal to Noise Ratio: Better than 61 dB at 3500 feet; 1.5 dB/3500' loss
Broadcast Standard: RS-170A
Power: 100VAC Primary/24VAC Secondary; Transformer included
Distance: 3500 feet & 3500' increments to 5 miles
Temperature: -10 to +85 degrees C
Humidity: 0 to 95%, non-condensing
Enclosure Material: Powder paint finished metal can; Dimensions: 4.5 x 2.625 x 1.75 inches
Dimensions: 2.25 x 2.3 x 1.0 inches
Warranty: One year LimitedSpecifications subject to change without notice.
To enquire about this product, please complete our enquiry form.
|
|
BACK TO
TOP Contact Us | Company Profile | Access Control
Systems | Enquiry Form |
This site was designed and produced by Internet
PageMakers