BACK TO TWISTED PAIR INTRODUCTION VTT1000 ADAPTER VTT2000 ADAPTER Specifications VTT3000 ADAPTER VTT5000 ADAPTER VTT7000 ADAPTER VTT747 ADAPTER
	VTT2000 Adapter Simply find a spare pair of telephone wire (Category 2, 3, 4, 5) near the camera or source video and cross-connect through the building(s) to where you plan to put your monitor, switcher and/or destination device. Every wire run will need just two adapters, one on each end of the twisted pair. Outstanding noise immunity allows the use of existing wire. You'll NEVER have to run coax long distances again, the VTT2000 can achieve much further distances than coax cable. You'll be able to obtain at least 1200 foot distances when sending baseband full color, full motion video and up to 3000 feet when sending black and white video. The VTT2000 Adapter will allow you to change the way you design video applications. Architect and Engineer Specifications Video Attenuation: 1.5 dB max Coax Impedance: 75 ohms Twisted Pair Impedance: 100 ohms Operating Frequency: 50 Hz to 10 MHz Maximum RF Input: 1.1 V @ 60 Hz Power: No power required. Temperature: -10 to +85 degrees C Humidity: 0 to 95%, non-condensing Enclosure Material: ABS plastic Dimensions: 2.25 x 2.3 x 1.0 inches Mounting Method: Adhesive Velcro® strip Warranty: LIFETIME Specifications subject to change without notice.
	To enquire about this product, please go to our enquiry form.
	To visit VTTI's home on the Web, click here. BACK TO TOP VTT1000 | VTT2000 | VTT3000 | VTT5000 | VTT 7000 | VTT747 TWISTED PAIR INTRODUCTION Coax Splitters | Fibre Optics Contact Us | Company Profile | Access Control Systems | Enquiry Form
	This site was designed and produced by Internet PageMakers