BACK TO TWISTED PAIR INTRODUCTION
|
VTT1000
ADAPTER |
VTT1000 Adapter
Simply find a spare pair of telephone wire (Category 2, 3, 4, 5) near the camera or source video and cross-connect through the building(s) to where you plan to put your monitor, switcher and/or destination device. Every wire run will need just two adapters, one on each end of the twisted pair. Outstanding noise immunity allows the use of existing wire.
You'll NEVER have to run coax long distances again, the VTT1000 can achieve much further distances than coax cable. You'll be able to obtain at least 1200 foot distances when sending baseband full color or black and white, full motion video. The VTT3000 Adapter will allow you to change the way you design audio/video applications.
Architect and Engineer Specifications
Video Attenuation: 1.5 dB max
Coax Impedance: 75 ohms
Common Mode Rejection Ratio: 36 db minimum
Twisted Pair Impedance: 100 ohms
Operating Frequency: 50 Hz to 10 MHz
Maximum RF Input: 1.1 V @ 60 Hz
Power: No power required.
Temperature: -40 to +85 degrees C
Humidity: 0 to 95%, non-condensing
Enclosure Material: ABS plastic
Dimensions: 1.75 x 1.0 x .75 inches
Mounting Method: Adhesive Velcro® strip
Warranty: LIFETIMESpecifications subject to change without notice.
To enquire about this product, please complete our enquiry form.
|
|
BACK TO
TOP Contact Us | Company Profile | Access Control
Systems | Enquiry Form |
|
| |
