Digital Drop-and-Insert Video Systems 9610V-10-Ch. Digital Drop-and-Insert Video Single-Mode Fibre Introduction Features Specifications Diagram Back to Digital Drop-and -Insert Video Systems Index   The 9610 is a ten-channel digital drop-and-insert video communications system with reverse sync and control data (RS232 or RS422). It is designed to serve particularly demanding perimeter monitoring applications such as those associated with access-control security systems, airport runways, or along stretches of highway, wheereever it is important that video systems be installed with minimal fibre runs. A 9610V system consists of a receiver/master control uit (MCU) capable of supporting up to ten real-time video input signals from transmitter/remote units(RUs). RUs may be specified for one-channel, two-channel, up to ten-channel operation. Systems may be configured several ways depending upon the requirements of your specific application. Several examples of configurations are provided on the two pages which follow. Both the MCU and the RUs mount easily in standard EIA 19-inch (48.3 cm) racks. Systems are foffered for use over one or two 8.3/125 um optical fibres. Optionally, one of the ten forward video channels may be specified as a data channel, thereby enabling two-way RS232 or RS422 data transmission. Features Up to Ten Channels of One-Way Video and Control Data Over Single-Mode Fibre. Minimal fibre Runs support up to Ten Real-Time Video Inputs. Choice of RS232 or RS422 Return Data. Diagnostic Indicators: Level/L<ossTM, Dta, LASER, and Video Status. Operates Over Distances of Three Miles (5 km) Between Nodes. Architect and Engineer Specifications Video/Data Video Bandwidth: 4.5 MHz for NTSC 5.5 MHz for PAL. Data Rate: 19.2 kbps. Genlock: Black burst or .3V sync. Modulation: TDM and FM operation. Signal-to-Noise Ratio: 57 dB maximum optical attenuation. I/O Level: 1 V peak-to-peak. I/O Impedance: 75 ohms. Differential Gain: < 3%. Differential Phase: < 2.5°. Tilt: < 3%. Optical Connectors: FC/PC; Video, BNC; Data, 3-pin screw terminal. Power/Temperature/Size Master: 12 VAC or + 12 VDC. Remote: + 10~30 VDC. Operates at 32° F to 122° F (0° to 85° C). Storage at 40° F to +185° F (-40° to 85° C). Master Units: 19.0"W x 10.0" D x 1.6" H (48.3 x 25.4 x 4.04 cm). Remote Units: 19.0" W x 10.0" D x 3.47" H (48.3 x 25.4 x 8.8 cm). For more information on this system, please go to our enquiry form.
	To visit Fiber Options home on the Web, click here. Back to Digital Drop-and -Insert Video Systems Inde BACK TO TOP | BROWSE PRODUCT INDEX | GLOSSARY OF TERMS Contact Us | Company Profile | Access Control Systems | Twisted Pair | Coax Splitters | Enquiry Form